jOG works with any video game, but some work better than others. We think it works best with sports games, shooters, platform and adventure games and our favourite game is Lego Star Wars. There is a simple rule of thumb: if the left analogue joystick controls character movement in your game, then jOG will work great; So point the joystick in the direction you want to go, start jOGing and control how your character moves!

 

Click here for a list of compatible games

 

 

 

 

-Always ensure that your games console and jOG adapter are in front of you when playing.
-Always ensure that you have enough space to play.
-Always ensure that your feet and legs are completely clear of the adapter and controller cables.
-Always remember that jOG is attached by a cable; be careful not to pull it out, or get tangled up in it!
-Avoid excessive play.
-Parents should monitor children for appropriate play.
-We recommend you take a 10-15 minute break every hour, even if you don't think you need it.
-Always consult your doctor before starting any new weight loss and/or exercise regime.
-If you are new to exercise, or have not exercised for a while, always start slowly and consult your doctor if you experience any discomfort, distress or any other symptoms.
-If at any point during exercise you begin to feel faint, dizzy or have physical discomfort, you should stop immediately and consult your doctor.

 

 

-When you toggle between modes, the red LED on the jOG adapter will blink once for jOG mode and twice for couch potato mode.
-In jOG mode, the green LED on the jOG adapter will light up for approximately one second per step taken. If you are moving continuously, the green LED will stay on. When the green LED is lit, the left joystick is enabled.
-If jOG doesn?t seem to be working properly during game play, try unplugging the jOG adapter from the console and reconnecting it.
-jOG comes with one AG13 battery installed. If the LCD display dims, or display stops operating entirely, the battery needs replacing.
-To replace the battery, use a small screwdriver to remove the screw from the battery door. Insert a new AG13 battery (or equivalent) then replace the battery door and screw shut.
-If the display shows an error message, reset the unit by removing and replacing the battery as above.
NOTE: All stored settings (weight, step length, etc) will return to default when the battery is removed or replaced.